Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the seal -4- after removal.
-- Fill the engine oil and check the oil level. Refer to ENGINE OIL .