Input Shaft Seal, Replacing: Removing
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- The clutch is installed.
CAUTION:
There is a risk of damaging the clutch from mishandling.
- The shaft seal can only be replaced when the clutch is installed. Refer to REMOVING
-- Pry out the shaft seal -arrow- carefully with the :T20143 .
NOTE:
Do not damage the contact surface on the shaft.