Part II

Fig 1: Exploded View Of Turbocharger

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Support
Turbocharger
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
O-ring
- Always replace after removing.
- Coat with engine oil
Hose
- For the crankcase ventilation
Bolt
- 9 Nm
Heated Oxygen Sensor -G39-
- Overview. Refer to OVERVIEW - HEATED OXYGEN SENSOR .
O-ring
- Always replace after removing.
- Coat with engine oil
Oil Supply Line
Bolt
- 9 Nm
O-ring
- Always replace after removing.
- Coat with engine oil
Bolt
- 9 Nm
Bolt
- 30 Nm
- Coat the with hot bolt paste. Refer to the Parts Information.
Heat Shield
Bolt
- 9 Nm
Coolant Supply Line
O-ring
- Always replace after removing.
- Coat with engine oil
Bolt
- 9 Nm
O-ring
- Always replace after removing.
- Coat with coolant
Bolt
- 20 Nm + 90°
- Always replace after removing.