Mounting Bracket, Removing And Installing: Installing
Install in reverse order of removal and Note The Following:
-- Install the accelerator pedal module. Refer to ACCELERATOR PEDAL POSITION SENSORS -G79- / -G185-, REMOVING AND INSTALLING .
-- Install the brake pedal. Refer to BRAKE PEDAL, REMOVING AND INSTALLING .
-- Bring the mounting bracket with the installed brake pedal and accelerator pedal module into the installation position.
- The mounting bracket must be seated in the bulkhead guides and all stud bolts.
-- Connect the brake pedal to the brake booster. Refer to BRAKE PEDAL, DISCONNECTING FROM BRAKE BOOSTER .
CAUTION:
- Make sure the brakes are working correctly before driving the vehicle for the first time.
-- Install the plenum chamber bulkhead. Refer to Bulkhead .