Brake Caliper, Removing And Installing, 1LC/1LD/1LE/1LF/1LH: Notes
Special Tools And Workshop Equipment Required
- Torque Wrench 1332 40-200 Nm :VAG1332
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview And Parts Information Prior To Starting Procedure.
Mandatory Replacement Parts
- Bolts - Brake Caliper to Brake Carrier
NOTE:
In The Following Description The Brake Caliper Is Removed With The Brake Carrier And Brake Pads. The Brake Hose Remains Connected.
Clean bolts before reusing.
Replace the damaged bolts. Refer to the Parts Information.