Brake Pedal, Removing And Installing, Vehicles With Automatic Transmission: Installing
NOTE:
Do "not" apply grease or oil to the mounting pin and pin mount in the brake pedal.
Install in reverse order of removal and Note The Following:
-- Insert the mounting pin -3- from the left all the way and secure using the clip -2- and bolt -arrow-.
-- Connect the brake pedal -1- to the brake booster. Refer to BRAKE PEDAL, DISCONNECTING FROM BRAKE BOOSTER .
-- Install the footwell vent. Refer to OVERVIEW - AIR ROUTING AND AIR DISTRIBUTION IN PASSENGER COMPARTMENT, FRONT / DRIVER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .
-- Install the instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
WARNING:
Risk Of Accident!
- Make sure the brakes are working correctly before driving the vehicle for the first time.