Camshaft, Measuring Axial Clearance

Special tools and workshop equipment required 

• Dial Indicator Holder: VW387 
• Dial Gauge - 0-10mm: VAS6079 

Procedure 

• The camshaft housing is removed. Refer to CAMSHAFT HOUSING, REMOVING AND INSTALLING .

-- Remove the : T40331/1  .

-- Secure the : VAS6079  with the : VW387  on the camshaft housing.

Fig 1: Identifying Dial Gauge Holder VW 387 And Dial Gauge - 0-10 mm VAS 6079

Courtesy of AUDI OF AMERICA, LLC

-- Press the camshaft against the dial gauge by hand.

-- Set the dial gauge to "0".

-- Press camshaft off the dial gauge and read the value:

Axial clearance 

• Intake camshaft: 0.014 to 0.064 mm.
• Exhaust camshaft: 0.048 to 0.155 mm.