B - Steel and Aluminum Bolts:
WARNING: This page is about a different variant/trim than selected.
-- In this case, bolts 1 through 13 are steel bolts and bolts 14 through 18 are aluminum bolts.
-- Tighten the bolts in the steps shown in the sequence:
| Step |
Bolts |
Tightening Specification/Additional Turn |
| 1. |
-1 through 13- |
15 Nm |
| 2. |
-14 through 18- |
8 Nm |
| 3. |
-1 through 18- |
90° additional turn |