LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Lubrication [CYMC,CYRB,CYRC,CWPB,DAXB,DAXC,CJEB,CJED,CJEE,CNCD,CNCE,CUHA,CUJA,CNCB,CUHB,DAYB,CYGA,CYNB,CYPA,CYPB,CYYA,CVJA,DDWA,DJYA,DKWA,DNTA,DKNA,DLHA,DLHB,DMFA,DKWB,DLGA]) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pump, Removing And Installing >> Removing

Oil Pump, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Version 1 oil pan lower section: remove the bolt -arrow- and the oil baffle.

Fig 1: Locating Oil Baffle Bolt
GWWA17-10746Courtesy of AUDI OF AMERICA, LLC

-- Pull the wire clip from the chain tensioner tension spring with : T10118  in direction of -arrow- and lock with : T40265  .

Fig 2: Identifying Chain Tensioner Spring, Remove/Install Components
GWWA17-10747Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the oil pump.

Fig 3: Locating Oil Pump Bolts
GWWA17-10749Courtesy of AUDI OF AMERICA, LLC