Oil Spray Jets, Removing And Installing: Removing

Cylinder "1 to 3" :

• Transmission removed. Refer to the appropriate Service Information .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Turn the crankshaft with the : T40263  , : T40314  and the 24 mm socket in direction of -arrow- until the corresponding bolt is accessible.

Courtesy of AUDI OF AMERICA, LLC

Removing Cylinder "4" :

• The engine is removed and secured to the engine/transmission holder. Refer to ENGINE, SECURING TO Engine and Transmission Holder .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Remove the balance shaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the connecting rod bearing cap.

-- Remove the crankshaft bearing cap.

-- Remove the crankshaft.

Continued for All Cylinders: 

-- Remove the pressure relief valve -1- using the : T10545  .

Fig 1: Exploded View Of Oil Spray Jet And Pressure Relief Valve

Courtesy of AUDI OF AMERICA, LLC

-- Remove the oil spray jet -2-.