Ribbed Belt, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

CAUTION:

There Is a Risk of Injury If the Radiator Fan Turns on by Itself.

- When performing procedures near the radiator maintain a distance to the radiator.

Vehicles with Generator:

Fig 1: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of Destroying a Used Ribbed Belt by Reversing the Running Direction.

- Mark the running direction before removal.

- Pay attention to the running direction when reinstalling.

-- Pivot the tensioner clockwise in direction of -arrow- and lock using the : T10060A .

-- Remove the ribbed belt.

Vehicles with Starter Generator:

Fig 2: Direction Of Turning The Tensioner

Courtesy of AUDI OF AMERICA, LLC

-- Turn the tensioner in direction of -arrow- to release the tension on the ribbed belt.

-- Secure the tensioner using the : T10060A .

-- Remove the ribbed belt.