Secondary Air Injection Solenoid Valve -N112-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
Vehicles with a Particulate Filter:
-- Remove the particulate filter. Refer to PARTICULATE FILTER, REMOVING AND INSTALLING .
Continuation for All Vehicles:
-- Free up the wires at the heat shield -1-.
-- Remove the nuts and bolt -arrows- and remove the heat shield.
All procedures are described. Refer to Secondary Air Injection Solenoid Valve -N112-, REMOVING AND INSTALLING .