Cam Adjustment Valve 1 -N205- /Exhaust Cam Adjustment Valve 1 -N318-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
- Replace the seals and O-rings after removal.
- Seal installation position: smaller inner diameter outward.
-- Oil the O-rings on the sealing surface to the valve for the camshaft adjustment with engine oil.
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
Additional procedures depending on the model: CAMSHAFT ADJUSTMENT VALVE 1 -N205-, REMOVING AND INSTALLING .