Overview - Rear Lid Tail Lamps

Courtesy of AUDI OF AMERICA, LLC

1. Tail Lamp
   • In the rear lid
   • Removing and installing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
2. Seal
   • Replace if damaged.
3. Nut
   • Tightening specification and sequence. Refer to Fig 1.
4. Grommet
5. Seal
   • Replace if damaged.
6. Nut
   • Tightening specification and sequence. Refer to Fig 1.
7. Grommet
8. Seal
   • Replace if damaged.
   • Self-adhesive
9. Nut
   • Tightening specification and sequence. Refer to Fig 1.
10. Seal
    • Replace if damaged.
11. Seal
    • Self-adhesive
    • Replace if damaged.

Tightening Specification and Sequence for the Tail Lamps 

Fig 1: Tail Lamps Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nuts for the tail lamps to 3.5 Nm and in the sequence -1, 2 and 3-.