LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> A4 Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Lubrication [CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA, DDWA, DJYA, DKWA, DNTA, DKNA, DLHA, DLHB, DMFA, DKWB, DLGA]) >> 17 Lubrication >> Engine Oil Cooler >> Engine Oil Cooler, Removing And Installing >> Removing

Engine Oil Cooler, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .

-- Remove the bolts -4 and 5- and remove the engine oil cooler -3- with the seal -2- from the sub-assembly bracket -1-.

Fig 1: Identifying Oil Cooler, Bolts And Seal
GWWA17-10228Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals