LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> A4 Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Lubrication (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 17 Lubrication >> Engine Oil Cooler >> Mechanical Switch Valve, Removing And Installing >> Installing

Mechanical Switch Valve, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Coat the mechanical switch valve O-rings with engine oil and install the switch valve.

-- Install the engine oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals