Overview - Charge Air System

Fig 1: Exploded View Of Charge Air System

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- If there are small impressions on the slats. Refer to appropriate service information. .
Air Duct Hose
- Must be free of oil and grease before installing
From the Turbocharger
Bolt
- 7 Nm
- Repair solution for broken catch
- Thread cutting
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
Charge Air Pressure Sensor -G31-
- Removing and installing. Refer to CHARGE AIR PRESSURE SENSOR -G31-, REMOVING AND INSTALLING .
O-ring
- Replace after removing.
To Intake Manifold
Seal
- Replace if damaged
Air Duct Pipe
- There are different versions. Refer to the Parts Information for the allocation.
- Must be free of oil and grease before installing
Seal
- Replace if damaged