LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> A4 Titanium >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Final Drive, Differential (Servicing - 0CJ, 0CL, 0CK, 0DN, 0DP) >> Final Drive, Differential >> Center Differential >> Center Differential, Removing And Installing >> Removing

Center Differential, Removing And Installing: Removing

NOTE:

General repair instructions. Refer to GENERAL REPAIR INFORMATION .

Guidelines for clean working conditions. Refer to RULES FOR CLEANLINESS WHEN WORKING ON DSG .

-- Remove the driveshaft. Refer to appropriate service information. .

-- Drain the transmission fluid. Refer to TRANSMISSION FLUID, DRAINING AND FILLING .

CAUTION:

Transmission components could be damaged.

  • The self-locking center differential is pretensioned with a pressure spring.
  • Carefully remove the center differential housing from the transmission toward the rear. Otherwise the center differential could fall out of the transmission.

-- Remove the bolts from the self-locking center differential housing in the following sequence: -11 to 1-.

GWWA39-10856Courtesy of AUDI OF AMERICA, LLC

-- Remove the oil guide piece.

GWWA39-10857Courtesy of AUDI OF AMERICA, LLC

-- Secure the center differential -1- so it does not fall out or remove it toward the rear from the input shaft.

GWWA39-10416Courtesy of AUDI OF AMERICA, LLC