Center Differential Ball Bearing, Replacing

Special Tools And Workshop Equipment Required 

• Press Plate :VW401 
• Press Plate :VW402 
• Press Piece - Multiple Use :VW412 
• Press Piece - Bushing - 50mm Diameter :VW432 
• Bearing Installer - Carrier Bearing :3350 
• Splitter :VAS251411 

-- Remove the center differential housing. Refer to CENTER DIFFERENTIAL, REMOVING AND INSTALLING .

-- Remove the center differential -1- from the output shaft.

Courtesy of AUDI OF AMERICA, LLC

-- Removing the ball bearing from the center differential

Courtesy of AUDI OF AMERICA, LLC

A - :VAS251411 

• The :VW432  faces the ball bearing.

-- Installing the ball bearing onto the center differential

Courtesy of AUDI OF AMERICA, LLC