Wheel Bearing Unit, Removing And Installing, Multi-Link Suspension Vehicles With Front Wheel Drive: Notes
Special tools and workshop equipment required
- Puller - Grease Cap: VW637/2
- Camshaft Installer Kit - Sleeve: 3241/4 from the Seal Installer - Camshaft Installer Kit: 3241
- Torque Wrench 1332 40-200Nm: VAG1332
- Torque Wrench 1410: VAG1410
- Socket - Xzn 18mm: T10162A
WARNING:
There is a risk of breaking the tool number : T10162 without the "A" index.
- : T10162A must be used exclusively.