Drive Axle With 90 Mm Outer CV Joint, Servicing: Notes
Special tools and workshop equipment required
- Press Plate: VW401
- Press Plate: VW402
- Press Piece - Rod: VW408A
- Press Piece - Rod: VW411
- Press Piece - 37mm: VW416B
- Press Piece - Multiple Use: VW447H
- Circlip Pliers: VW161A
- Torque Wrench 1331 5-50Nm: VAG1331
- Torque Wrench 1332 40-200Nm: VAG1332
- Clamping Pliers: VAG1682A
- Tripod Joint Tool: T10065
CV Joint, Disassembling:
Removing the outer CV joint
-- Remove the CV joint from the drive axle by hitting it with a light alloy hammer.
Circlip, Removing and Installing:
Drive Protective Joint Boot Cap Under with a Brass or Copper Drift:
Removing the Inner CV Joint: