Heater And A/C Unit, Removing And Installing: Notes
Special tools and workshop equipment required
- Hose Clamps - Up To 25mm :3094
- Engine Bung Set :VAS6122
- Commercially available compressed-air gun
NOTE:
Certain tools are required to discharge the refrigerant circuit. These work procedures must only be performed by trained personnel. Refer to Refrigerant Circuit (Refrigerant R134a Servicing, Refrigerant Circuit, Working with A/C Service Station) and Working with A/C Service Station (1 Of 2) / Working with A/C Service Station (2 Of 2) .