Heater And A/C Unit Bracket, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

• Tightening specification. Refer to HEATER AND A/C UNIT, DISASSEMBLING AND ASSEMBLING .

-- Insert the bracket -1 and 3- into the mounts on the heater and A/C unit -2- and bring the A/C unit into the installed position.

Courtesy of AUDI OF AMERICA, LLC

-- Install the heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .

-- Tighten the nut to the brackets.

-- Install the remaining components.

-- Check the DTC memory and erase any displayed entries using the :Vehicle Diagnostic Tester  in the "Guided Fault Finding"  function.

-- Check the heater and A/C unit function.