Evaporator, Removing And Installing: Removing
-- Remove the heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .
-- Remove the Fresh Air Blower -V2-. Refer to Fresh Air Blower -V2-, REMOVING AND INSTALLING .
-- Remove the air intake duct. Refer to AIR INTAKE DUCT, REMOVING AND INSTALLING .
-- Remove the coolant pipe from the heat exchanger. Refer to HEATER CORE COOLANT PIPES, REMOVING AND INSTALLING .
-- Disconnect the air distribution housing and evaporator housing.
-- Remove bolts -1-.
-- Release the retainers -4 and 5- in direction of -arrows-.
-- Remove the evaporator housing upper section -3- from the lower section -2-.
-- Remove the evaporator -2- from the evaporator housing lower section -1-.
-- Remove the expansion valve. Refer to EXPANSION VALVE, REMOVING AND INSTALLING .
-- Remove the seal/insulation -3- by pulling the moving part -5- to the side in direction of -arrow-.
-- Remove the retainer -4- for the refrigerant lines.