Condenser, Removing And Installing, Q2 China: Removing
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Disconnect the refrigerant lines from the condenser. Refer to REFRIGERANT LINES, DISCONNECTING AND CONNECTING AT CONDENSER, Q2, Q2 CHINA .
-- Remove the air ducts for the radiator. Refer to Lock Carrier .
-- Loosen the radiator and tilt it toward the engine as much as possible. Refer to [For engine(s) CZRA] Radiator/Radiator Fan (Overview - Fan Shroud and Radiator Fan).
-- Release the sealing lip -1- at the bottom from the charge air cooling circuit cooler -item 2- -arrow A- and disengage it at the top -arrow B-.
-- Have a second technician release the clips -1- in the -direction of arrow A- and remove the condenser -3- upward out of the mounts on the charge air cooling circuit cooler -item 2- -B arrows-.