Seat Side Trim On Tunnel Side, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Unscrew the front seat and tip forward with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the expanding rivet -1- from the seat side trim on the tunnel side.
-- Disengage the front seat side trim -2- from the seat pan, to do this release the retaining tab -3- and pull the seat side trim outward.
-- Disengage the seat side trim on the tunnel side from the backrest hinge in direction of -arrow- and remove.