Headrest Guide, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
NOTE:
The headrest guide can only be inserted in one position.
- The tab -3- on the headrest guide must engage in the mount cut-out on the backrest frame.
- The tab(s) must engage correctly in backrest frame.
WARNING:
- Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
- Follow all the instructions when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
Further installation is the reverse order of removal.