ABS Control Module -J104- AND ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING, VEHICLES WITH AWD: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Vehicle Diagnostic Tester
Torque Wrench 1331 5-50Nm: VAG1331
Brake Pedal Actuator: VAG1869/2 .
Bleeder bottle from the Brake Charger/Bleeder Unit: VAS5234
Plugs from the Assembly Part Set: 5Q0 698 311

NOTE:

Component location. Refer to OVERVIEW - CONTROL MODULE AND HYDRAULIC UNIT .

If the ABS Control Module -J104- /ABS Hydraulic Unit -N55- is being replaced, select the "Replace" function for the ABS Control Module -J104- /ABS Hydraulic Unit -N55- using the Vehicle Diagnostic Tester in Guided Functions .

Sealing plugs M10
Sealing plugs M12