Brake Caliper, Replacing, Front Brakes RS3 1LF/1LH/1LL/1LN/1LU: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Torque Wrench 1332 40-200Nm: VAG1332
- Brake Pedal Actuator: VAG1869/2 .
- Bleeder bottle from the Brake Charger/Bleeder Unit: VAS5234
- Plugs from the Assembly Part Set: 5Q0 698 311
NOTE:
Clean the bolts and nuts before reusing.
Always replace self-locking nuts and bolts.
Always replace damaged nuts and bolts.
NOTE:
In the following description the brake caliper is removed and replaced. The brake hose is removed.