Brake Caliper, Replacing, Front Brakes 1ZF: Removing
WARNING: This page is about a different variant/trim than selected.
NOTE:
The procedure only applies to the replacement of or subsequent repair work done on the brake caliper.
-- Remove the wheels.
-- Attach a bleeder bottle bleed hose to the brake caliper breather valve.
-- Open the bleeder valve.
-- Insert the : VAG1869/2 .
-- Close the bleeder valve and remove the bleeder bottle.
-- Remove the brake hose.
-- Remove both caps from the brake caliper bearing bushings.
-- Loosen both guide pins and remove them from the brake caliper.
-- Remove the brake caliper from the brake carrier.
-- Remove the brake pads from the brake caliper.
WARNING:
There is a health risk.
- Do not blow out brake system with compressed air.