Brake Caliper, Removing And Installing, Front Brakes 1ZF: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the wheels.

-- Remove both caps from the brake caliper bearing bushings.

-- Slightly turn back the brake piston on the installed brake pads.

At the Same Time Do Not Damage the Brake Pads and Brake Caliper.

-- Loosen both guide pins and remove them from the brake caliper.

CAUTION:

There is a risk of damaging the brake hose.

Do not let the brake caliper hang on the brake hose. Do not support the weight with the brake hose.
Replace the brake hose if damaged.

There is a risk of damaging the brake caliper piston.