Brake Caliper, Removing And Installing, Front Brakes 1LB/1LC/1LJ/1ZA/1ZD/1ZE/1ZP: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Torque Wrench 1332 40-200Nm: VAG1332
NOTE:
Clean the bolts and nuts before reusing.
Always replace self-locking nuts and bolts.
Always replace damaged nuts and bolts.
NOTE:
In the following description the brake caliper is removed with the brake carrier and brake pads. The brake hose remains connected.