LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> A3 Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Front Suspension) >> 40 Front Suspension >> SUBFRAME >> Coupling Rod, Removing And Installing >> Installing

Coupling Rod, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Installation is reverse of removal, noting the following:

-- Tighten the nuts -arrows- for securing the coupling rod on the stabilizer bar or tighten the stabilizer bar to do this counterhold with a bit on the threaded pins -2-.

NOTE:

The counter hold tool cannot be tilted.

scientia non olet · About LEMON Manuals