Length Adjustment at Hinge, Sedan:

WARNING: This page is about a different variant/trim than selected.

Courtesy of AUDI OF AMERICA, LLC

Hinge
- Removing. Refer to HINGES, REMOVING AND INSTALLING, SEDAN .
Nut
- Tightening specification -Item 2- OVERVIEW - REAR LID, SEDAN => List Item:Nut
Rear Lid
- Adjusting
  -- Calculate how much the lid must be adjusted lengthwise.
  
  -- Loosen the nuts -2- on the threaded pins -4-.
  
  -- Slide the lid on the hinges around the corresponding area.
  
  -- Tighten the nuts to the tightening specification -Item 2- OVERVIEW - REAR LID, SEDAN => List Item:Nut.
Threaded Pins