Release Cable, Removing And Installing: Notes

Release Cable Routing in Vehicle Interior

Courtesy of AUDI OF AMERICA, LLC

-- Route the release cable -2- along the >>A-pillar<< as shown.

-- Press the grommet -1- onto the side >>A-pillar<< from the interior.

Routing the Release Cable Inside the Engine Compartment

Courtesy of AUDI OF AMERICA, LLC

1. Grommet
2. Fender Flange
3. Release Cable

   -- Starting from the interior, route the release cable -3- forward in the engine compartment and along the fender mounting flange as illustrated.

   -- Press the release cable completely in the clips.

   -- Push the coupling into the lock carrier. Refer to Release Cable Coupling, Removing and Installing .

4. Latch
   • Removing and installing. Refer to LATCH, REMOVING AND INSTALLING .
5. Release Cable Coupling
6. Knurl
   • To adjust so that the hood catches unlock evenly.
7. Clip