LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> A3 Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Hood, Lids) >> 55 Hood, Lids >> Hood >> Insulation, Removing And Installing

Insulation, Removing And Installing

WARNING: This page is about a different variant/trim than selected.
GWWA55-10867Courtesy of AUDI OF AMERICA, LLC
  1. Clip
  2. Hood Trim
    • Installing

      -- Slide the trim over the tabs on the rear edge into the holes provided on the inner panel.

      -- Insert the tabs at the front edge and sides.

      -- The clips must engage audibly when pressing in.

      -- Press the clip in.

  3. Hood