Release Button In Rear Lid Handle -E234-, REMOVING AND INSTALLING: Removing
-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Disconnect and free up the connectors -3 and 5- and the antenna wire -1-.
-- Remove the nuts -2 and 4-.
-- Release the retaining tabs in direction of -arrows-.
-- Remove the license plate lamps. Refer to Left License Plate Lamp -X4- /Right License Plate Lamp -X5-, REMOVING AND INSTALLING .
-- Release the side retaining tabs using the Connecting Rod Support: 3090 in direction of -A arrows- and press the button -1- outward in direction of -arrow B-.
-- Guide the wire through the opening.
-- Remove the rear lid trim panel. Refer to Luggage Compartment Trim Panels .
-- Disconnect the connector -4- and antenna wire -2-.
-- Free up the connector -3 and 5-.
-- Release the catches -6- and remove the cover -1-.
-- Disconnect the connector -2-.
-- Remove the nuts -1 and 3-.
-- Open the tabs in direction of -arrows- and remove the anti-theft protection -4-. Guide the wires through the opening.
-- Release the side tabs in direction of -arrows A- and remove the button -1- outward in direction of -arrow B-.
-- Guide the electric wire -2- out through the opening.