LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> A3 Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Passenger Protection, Airbags, Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Head Curtain Airbags >> Head Curtain Airbag With Igniter, Removing And Installing >> Head Curtain Airbag Guide, Removing And Installing >> Removing

Head Curtain Airbag Guide, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the headliner. Refer to HEADLINER, REMOVING AND INSTALLING .

A3: 

Fig 1: Head Curtain Airbag Guide, A3 Tightening Specification
GWWA69-10988Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Disengage and remove the head curtain airbag guide -2- from the body.

Sedan: 

GWWA69-10989Courtesy of AUDI OF AMERICA, LLC

-- Versions equipped with a sliding sunroof: disengage the water drain hose.

-- Unclip the rear clips for the head curtain airbag HEAD CURTAIN AIRBAG WITH IGNITER, REMOVING AND INSTALLING, SEDAN - Disengage the clips -1, 2, and 3- head curtain airbag retaining tab clips from the body. .

-- Remove the expanding clips -1, 2 and 3-.

-- Disengage and remove the head curtain airbag guide -4- from the body.