AUX IN - USB Connection Baseplate -R193-, THROUGH MY 2016
WARNING: This page is about a different variant/trim than selected.
NOTE:
Unlisted connector terminals are not assigned.
AUX IN - USB Connection Baseplate R193
- 7-Pin Connector -T7-
- 4-Pin Connector -T4s-
1 - 7-Pin Connector T7
All pins are connected to the Information Electronics Control Module 1 -J794-.
- Ground
- D (-)
- Not Assigned
- D (+)
- Ground Shielding
- USB, +5V
- USB, Ground
2 - 4-Pin Connector T4s
All pins are connected to the Information Electronics Control Module 1 -J794-.
- LF right
- LF ground
- LF left
- LF ground