Close Range Communication Antenna, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the center speaker trim in the instrument panel. Refer to OVERVIEW - INSTRUMENT PANEL .
-- Release the catches -2- for the Close Range Communication Antenna -R269- -1-.
-- Tilt the Close Range Communication Antenna -R269- -1- in the direction of -arrow- out of the holder in the instrument panel.
-- Release and disconnect the connector -3- from the Close Range Communication Antenna -R269- -1-.
-- Remove the Close Range Communication Antenna -R269-.