Overview - Adaptive Cruise Control, Version 2
WARNING: This page is about a different variant/trim than selected.
- Cover
- Distance Regulation Control Module -J428-
- Removing and installing. Refer to Distance Regulation Control Module -J428-, REMOVING AND INSTALLING .
- Adapter Frame with Stud Bolt
- For Control Module for Adaptive Cruise Control -J428-
- Replace:
- Through MY 2016. Refer to Distance Regulation Control Module -J428- ADAPTER FRAME, REPLACING, VERSION 2 THROUGH MY 2016 .
- From MY 2017. Refer to Distance Regulation Control Module -J428- ADAPTER FRAME, REPLACING, VERSION 2 AND RS3 FROM MY 2017 .
- Bolt
- 8 Nm
- Quantity: 2
- Bolt
- 5.5 Nm
- Quantity: 2
- Impact Member
- Operating Lever for Adaptive Cruise Control
- Common part with the steering column switch module. Cannot be replaced separately
- Removing and installing. Refer to STEERING COLUMN COMBINATION SWITCH, REMOVING AND INSTALLING .
- Instrument Cluster
- With Instrument Cluster Control Module -J285-
- Bracket
- There are different versions. Refer to the Parts Information.
- Quick Release Fastener
- Always replace
- Quantity: 3
- Retaining Plate
- There are different versions. Refer to the Parts Information.
- Removing and Installing, through MY 2016. Refer to BASEPLATE FOR Distance Regulation Control Module -J428-, REMOVING AND INSTALLING, VERSION 2 THROUGH MY 2016 .
- Removing and Installing, from MY 2017. Refer to BASEPLATE FOR Distance Regulation Control Module -J428-, REMOVING AND INSTALLING, VERSION 2 AND RS3 FROM MY 2017 .
- There are different versions. Refer to the Parts Information.
- Stud Bolt
- Pay attention to the adjustment dimension for vehicles through MY 2016. Refer to Installing - Measure the dimension -a- at all stud bolts using the : VAS6335 and correct if necessary. .
- Pay attention to the adjustment dimension for vehicles from MY 2017. Refer to Installing - Measure the dimension -a- at the upper stud bolt using the : VAS6335 and correct if necessary. .
- Quantity: 2