Overview - Trailing Arm: Notes
WARNING: This page is about a different variant/trim than selected.
- Cover
- Bracket
- Bolt
- 50 Nm + 45°
- Always replace if removed
- Bolt
- 90 Nm + 90°
- Always replace if removed
- Bolt
- 70 Nm + 90°
- Always replace if removed
- Bolt
- 70 Nm + 90°
- Always replace if removed
- Bolt
- Tightening specification. Refer to OVERVIEW - COMPONENT LOCATION ABS/ESP .
- Right Rear ABS Wheel Speed Sensor -G44- /Left Rear ABS Wheel Speed Sensor -G46-
- Removing and installing. Refer to OVERVIEW - COMPONENT LOCATION ABS/ESP .
- Wheel Bearing Housing
- For FWD vehicles
- Wheel Bearing Housing
- For AWD vehicles
- Trailing Arm
- Removing and installing. Refer to TRAILING ARM WITH MOUNTING BRACKET, REMOVING AND INSTALLING .
- Bonded Rubber Bushing
- Note installed position. Refer to Bonded Rubber Bushing Installed Position:
- Replacing. Refer to TRAILING ARM, SERVICING .