Center Console with Standard Equipment

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Center Console

Courtesy of AUDI OF AMERICA, LLC

Securing Bracket
- For the center console
- Removing and Installing. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .
Front Bracket
- For the center console
- Removing and Installing. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .
- Quantity: 2
Nut
- 3.5 Nm
- Quantity: 2
Cap
- Push in the center console
- Quantity: 2
Bolt
- 1.5 Nm
- Quantity: 2
Center Console
- Removing and Installing. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
- Versions with storage net: adding the storage net in the new center console. Refer to STORAGE NET, ADDING IN THE NEW CENTER CONSOLE .
Bolt
- 3 Nm
- Quantity: 4
Liner Mat
Ashtray
- Equipped on some models
- Audi Logo on the ashtray cover is transverse to the direction of travel and ashtray can be used from the driver position
Gearshift Lever/Selector Lever
- Overview. Refer to the appropriate Service Information .
Decorative Trim
- For the center console insert
- Removing and Installing. Refer to CENTER CONSOLE DECORATIVE TRIM, REMOVING AND INSTALLING .
Coin Holder
- Allocation. Refer to the Parts Information.
- Removing and Installing. Refer to COIN HOLDER, REMOVING AND INSTALLING .
- Engage in the rear of the center console and press on it until it engages audibly.
Insert
- Replace damaged or deformed clips
- For the center console
- Removing and Installing. Refer to CENTER CONSOLE INSERT, REMOVING AND INSTALLING .
- Engage in the front of the center console and press on it until it engages audibly.
Clip
- Replace damaged or deformed clips
- For the center console insert
- Place in the insert
- Quantity: 6
Clip
- Replace damaged or deformed clips
- For the cover
- Quantity: 4
- Insert in the cover
Rear Trim
- For the center console
- Removing and Installing. Refer to CENTER CONSOLE REAR TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
Bolt
- 3 Nm
- Quantity: 4
Rear Bracket
- For the center console
- Removing and Installing. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .
Bolt
- 8 Nm
- Quantity: 2
Storage Compartment
- Allocation. Refer to the Parts Information.
- Removing and Installing. Refer to FRONT CENTER CONSOLE STORAGE COMPARTMENT, REMOVING AND INSTALLING .
Bolts
- 1.4 Nm
- Quantity: 4
Nut
- 8 Nm
- Quantity: 4