Headliner, Removing And Installing, A3: Installing
WARNING: This page is about a different variant/trim than selected.
WARNING:
Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
-- Align the headliner, press in the centering pin at the back of the headliner until it engages audibly in the body mounting point.
-- Install the center support for the sun visor. Refer to SUN VISOR CENTER SUPPORT, REMOVING AND INSTALLING .
-- Press the rear clips on the headliner into the mounting points on the body until they audibly engage.
Further installation is the reverse order of removal.