Overview - Rear Lid Upper Trim Panel
WARNING: This page is about a different variant/trim than selected.
- Pin
- For the rear shelf strap
- Clipped in the rear lid trim panel
- Quantity: 2
- Expanding Clip
- Quantity: 2
- Rubber Buffer
- Quantity: 5
- Insert in the trim panel
- Rear Lid Upper Trim Panel
- Removing and Installing. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Clip
- Quantity: 8
- Insert in the trim panel
- Remove any remaining rear lid clips using Omega Clip Tool: T40280 and use them to install the trim.
- Replace damaged or deformed clips