Instrument Panel Vent, Removing And Installing: Installing

Fig 1: Turning Control Ring 45 Degrees To Right

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

-- Turn control ring -1- right -α- = 45° from vertical.

-- Push the instrument panel vent -2- until stop in the instrument panel -1- -arrow-.

Fig 2: Sliding Instrument Panel Vent In Direction Of Arrow Into Instrument Panel

Courtesy of AUDI OF AMERICA, LLC

• The guide -arrow B- must engage in the cut-out -arrow A-.

-- Check the noise. For this tun the operating cable to the stops.