Left Back-Up Lamp Bulb -M16- /Right Back-Up Lamp Bulb -M17-, REMOVING AND INSTALLING, TAIL LAMPS WITH LED: Removing

WARNING: This page is about a different variant/trim than selected.

-- Turn the light switch to position "0".

-- Insert a small screwdriver into the opening -arrow A- and remove the cover -1- in the direction of -arrow B-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -5-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the locking brackets -1, 2 and 4- and remove the bulb socket -3- from the housing.

-- Remove the back-up lamp bulb -6- from the bulb carrier.

-- Turn the light switch to position "0".

-- Release the cover -1- from the clip in the direction of -arrow- using the : 3409 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the locking brackets -1, 2 and 5- and remove the bulb socket -4- from the housing.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the back-up lamp bulb -3- from the bulb carrier.