Parking Aid Control Module -J446-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- If equipped, release the retainer -2- in direction of -arrow- and remove the cover -1- downward.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connectors -1 and 2- by pressing the tab, turning the retaining bracket and disconnecting the connector.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the tab -arrow- and remove the control module -3- downward from the bracket.