High-Mounted Brake Lamp Bulb -M25-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal. Note the following:

NOTE:

If LED's are malfunctioning, high-mount brake light must be completely replaced.

Install in the reverse order of removal. Note the following:

NOTE:

The entire high-mounted brake lamp must be replaced in the event of faulty LEDs.

-- The mount -2- for the high-mounted brake lamp -3- must engage evenly at the left and right in the guide rails -1-.

Fig 1: Connecting Electrical Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Slide the high-mounted brake lamp evenly forward in the direction of travel without tilting it until it engages audibly in direction of -arrows-.

Install in the reverse order of removal. Note the following:

NOTE:

If LED's are malfunctioning, high-mount brake light must be completely replaced.