Overview - Rear Wheel Housing Liner, Sedan
WARNING: This page is about a different variant/trim than selected.
- Expanding Rivet
- Quantity: 3
- Cover
- Removing and Installing. Refer to COVER, REMOVING AND INSTALLING .
- Rear Wheel Spoiler
- To remove, loosen the rear wheel housing liner at the front and press it to the side. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
- Bolt
- 2 Nm
- Quantity: 3
- Rear Wheel Housing Liner
- Removing and Installing. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
- Clip
- Quantity: 3
- Bolt
- Tightening sequence. Refer to Figure.
- Quantity: 3
- Bolt
- 2 Nm
- Quantity: 3